NEW QUESTION 1
Consider the image showing basic architectural concepts.

What are items A and B?

• A. A-Architecture Viewpoint, B-Architecture View
• B. A-Architecture Board, B-Architecture Capability
• C. A-Candidate Architecture, B-Trade-off
• D. A-Requiremen
• E. B-Candidate Architecture

Answer: A

Explanation:
✑ The image shows a diagram that illustrates the basic concepts of architecture description as defined by the ISO/IEC/IEEE 42010:2011 standard1, which is also adopted by the TOGAF standard2.
✑ According to the ISO/IEC/IEEE 42010:2011 standard, an architecture description is a work product used to express an architecture, and it consists of one or more architecture views1.
✑ An architecture view is a representation of a system from the perspective of a related set of concerns, and it conforms to an architecture viewpoint1.
✑ An architecture viewpoint is a specification of the conventions for constructing and using an architecture view to address specific stakeholder concerns1.
✑ Therefore, the correct answer is option A, which identifies the items labeled as ??A?? and ??B?? in the image as an architecture viewpoint and an architecture view, respectively. References:
✑ 1: ISO/IEC/IEEE 42010:2011 - Systems and software engineering — Architecture description1
✑ 2: TOGAF Standard, Version 9.2 - Part IV: Architecture Content Framework -31. Architectural Artifacts2

NEW QUESTION 2
Refer to the table below:

Which ADM Phase does this describe?

• A. Phase E
• B. Phase G
• C. Phase A
• D. Phase F

Answer: B

Explanation:
The table describes the output, outcome, and essential knowledge of an ADM phase that oversees the implementation of changes necessary to reach the adjusted target state. This corresponds to Phase G, also known as Implementation Governance, which ensures that the architecture defined in earlier phases is realized, and it oversees the development and implementation of projects to align with this architecture. The essential knowledge required during this phase includes understanding constraints on the implementation team and adjusting stakeholder priority and preference in response to success, value, effort, and risk of change. References: TOGAF Version 9.1 - 1

NEW QUESTION 3
Which of the following describes the practice by which the enterprise architecture is managed and controlled at an enterprise-wide level?

• A. Corporate governance
• B. Architecture governance
• C. IT governance
• D. Technology governance

Answer: B

Explanation:
According to the TOGAF Standard, 10th Edition, architecture governance is ??the practice by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level?? 1. Architecture governance ensures that the architecture development and implementation are aligned with the strategic objectives, principles, standards, and requirements of the enterprise, and that they deliver the expected value and outcomes. Architecture governance also involves establishing and maintaining the architecture framework, repository, board, contracts, and compliance reviews 1. The other options are not correct, as they are not the term used by the TOGAF Standard to describe the practice by which the enterprise architecture is managed and controlled at an enterprise-wide level. Corporate governance is ??the system by which an organization is directed and controlled?? 2, and it covers aspects such as leadership, strategy, performance, accountability, and ethics. IT governance is ??the system by which the current and future use of IT is directed and controlled?? 2, and it covers aspects such as IT strategy, policies, standards, and services. Technology governance is ??the system by which the technology decisions and investments are directed and controlled?? 3, and it covers aspects such as technology selection, acquisition, deployment, and maintenance. References: 1: TOGAF Standard, 10th Edition, Part VI: Architecture Governance, Chapter 44: Introduction. 2: TOGAF Standard, 10th Edition, Part I: Introduction, Chapter 3: Definitions. 3: TOGAF Series Guide: Using the TOGAF Framework to Define and Govern Service-Oriented Architectures, Part II: Using the TOGAF Framework to Define and Govern Service-Oriented Architectures, Chapter 5: Technology Governance.

NEW QUESTION 4
Consider the following descriptions of deliverables consumed and produced across the TOGAF ADM cycle.

Which deliverables match these descriptions?

• A. 1 Architecture Requirements Specification - 2 Request for Architecture Work - 3 Statement of Architecture Work - 4 Architecture Principles
• B. 1 Statement of Architecture Work - 2 Architecture Principles - 3 Architecture Requirements Specification - 4 Request for Architecture Work
• C. 1 Architecture Principles - 2 Architecture Requirements Specification - 3 Request for Architecture Work - 4 Statement of Architecture Work
• D. 1 Request for Architecture Work - 2 Statement of Architecture Work - 3 Architecture Principles - 4 Architecture Requirements Specification

Answer: D

Explanation:
The Request for Architecture Work is a deliverable that is sent from the sponsor and triggers the start of an architecture development cycle. It defines the scope, budget, schedule, and deliverables for a specific architecture project. The Statement of Architecture Work is a deliverable that is produced by the architect and defines the approach and resources needed to complete an architecture project. It forms the basis of a contractual agreement between the sponsor and the architecture organization. The Architecture Principles are a deliverable that is produced by the architect and defines the general rules and guidelines for the architecture work. They reflect the business principles, business goals, and business drivers of the organization. The Architecture Requirements Specification is a deliverable that is produced by the architect and defines the requirements that govern the architecture work. It covers both functional and non-functional requirements as well as constraints and assumptions.

NEW QUESTION 5
Which of the following statements about architecture partitioning is correct?

• A. Partitions are used to simplify the management of the Enterprise Architecture.
• B. Partitions are equivalent to architecture levels.
• C. Partitions reflect the organization's structure.
• D. Partitions are defined and assigned to agile Enterprise Architecture teams.

Answer: A

Explanation:
Based on the web search results, architecture partitioning is a technique that divides the Enterprise Architecture into smaller and manageable segments or groups, based on various classification criteria, such as subject matter, time, maturity, volatility, etc.12 Architecture partitioning is used to simplify the development and management of the Enterprise Architecture, by reducing complexity, improving governance, enhancing reusability, and increasing alignment and agility12. Therefore, the statement that partitions are used to simplify the management of the Enterprise Architecture is correct.
The other statements are incorrect because:
•Partitions are not equivalent to architecture levels. Architecture levels are different layers of abstraction that describe the Enterprise Architecture from different perspectives, such as strategic, segment, and capability3. Partitions are subsets of architectures that are defined within or across the levels, based on specific criteria1.
•Partitions do not necessarily reflect the organization??s structure. The organization??s structure is one possible criterion for partitioning the architecture, but it is not the only one. Other criteria, such as business function, product, service, geography, etc., can also be used to partition the architecture12.
•Partitions are not defined and assigned to agile Enterprise Architecture teams. Agile Enterprise Architecture is an approach that applies agile principles and practices to the architecture work, such as iterative development, frequent feedback, adaptive planning, and continuous delivery4. Partitions are not a specific feature of agile Enterprise Architecture, but a general technique that can be applied to any architecture method or framework, including TOGAF12.
References: 1: The TOGAF Standard, Version 9.2 - Architecture Partitioning 2: TOGAF® Standard — Introduction - Architecture Partitioning 3: [The TOGAF Standard, Version 9.2 -
Applying the ADM Across the Architecture Landscape] 4: TOGAF® Standard — Introduction - Definitions - The Open Group

NEW QUESTION 6
What are the following activities part of?
• Initial risk assessment
• Risk mitigation and residual risk assessment
• Risk monitoring

• A. Risk Management
• B. Phase A
• C. Security Architecture
• D. Phase C

Answer: A

Explanation:
The following activities are part of Risk Management:
✑ Initial risk assessment
✑ Risk mitigation and residual risk assessment
✑ Risk monitoring
Risk Management is the process of identifying, assessing, and responding to risks that may affect the achievement of the enterprise??s objectives. Risk Management involves balancing positive and negative outcomes resulting from the realization of either opportunities or threats. Reference: The TOGAF® Standard | The Open Group Website, Section 3.3.3 Risk Management.

NEW QUESTION 7
Which one of the following classes of information within the Architecture Repository would typically contain a list of the applications in use within the enterprise?

• A. Reference Library
• B. Architecture Metamodel
• C. Architecture Landscape
• D. Governance Log

Answer: C

Explanation:
The Architecture Landscape is a class of information within the Architecture Repository that shows an architectural view of the building blocks that are in use within the organization today (the Baseline Architecture), as well as those that are planned for the future (the Target Architecture). The Architecture Landscape typically contains a list of the applications in use within the enterprise, along with their relationships and dependencies, as well as other relevant architectural information. The Architecture Landscape helps to identify opportunities for re-use, consolidation, or retirement of existing applications, as well as gaps or overlaps in the current or future architecture.References: : The TOGAF Standard, Version 9.2, Part IV: Architecture Content Framework, Chapter 34: Architecture Landscape : The TOGAF Standard, Version 9.2, Part VI: Architecture Capability Framework, Chapter 47: Architecture Repository

NEW QUESTION 8
Which of the following best describes the class of information known as the Reference Library within the Architecture Repository?

• A. Guidelines and templates used to create new architectures
• B. Specifications to which architectures must conform
• C. A record of the governance activity across the enterprise
• D. Processes to support governance of the Architecture Repository

Answer: A

Explanation:
The class of information known as the Reference Library within the Architecture Repository contains guidelines and templates used to create new architectures. The Reference Library provides a set of resources that can be leveraged or customized for specific architecture development purposes. It includes generic building blocks, patterns, models, standards, frameworks, methods, techniques, best practices, etc. Reference: The TOGAF® Standard | The Open Group Website, Section 2.4 Architecture Repository.

NEW QUESTION 9
Which of the following describes how the Enterprise Continuum is used when developing an enterprise architecture?

• A. To identify and understand business requirements
• B. To coordinate with the other management frameworks in use
• C. To describe how an architecture addresses stakeholder concerns
• D. To classify architecture and solution assets

Answer: D

Explanation:
The Enterprise Continuum consists of two complementary concepts: the Architecture Continuum and the Solutions Continuum1. The Architecture Continuum provides a consistent way to describe and understand the generic and reusable architecture building blocks, such as models, patterns, and standards, that can be applied and tailored to specific situations2. The Solutions Continuum provides a consistent way to describe and understand the specific and implemented solution building blocks, such as products, services, and components, that realize the architecture building blocks3. The Enterprise Continuum enables the reuse and integration of architecture and solution assets
across different levels of abstraction, scope, and detail, ranging from foundation architectures to organization-specific architectures1.
The Enterprise Continuum is used when developing an enterprise architecture to support the following activities1:
•Selecting relevant architecture and solution assets from the Architecture Repository or other sources, based on the business drivers, goals, and requirements
•Adapting and customizing the architecture and solution assets to suit the specific needs and context of the enterprise
•Defining and developing the target architecture and the architecture roadmap, based on the gaps and opportunities identified between the baseline and the target states
•Defining and developing the implementation and migration plan, based on the architecture roadmap and the solution building blocks
•Governing and managing the architecture and solution assets throughout the architecture lifecycle, ensuring their quality, consistency, and compliance
References: 1: The TOGAF Standard, Version 9.2 - Enterprise Continuum 2: The TOGAF Standard, Version 9.2 - Architecture Continuum 3: The TOGAF Standard, Version 9.2 - Solutions Continuum

NEW QUESTION 10
Which of the following best describes purpose of the Business Scenarios?

• A. To identify risk when implementing an architecture project
• B. To identify and understand requirements
• C. To catch errors in a project architecture early
• D. To guide decision making throughout the enterprise

Answer: B

Explanation:
Business scenarios are a technique for capturing, clarifying, and communicating the functional and non-functional requirements of a system. Business scenarios describe the business environment, the actors involved, the desired outcomes, and the processes or rules that govern the behavior of the system. Business scenarios are useful for ensuring that the architecture addresses the real needs and concerns of the stakeholders, and for validating and testing the architecture against expected situations. Business scenarios are developed in Phase A: Architecture Vision of the ADM cycle, and refined and updated throughout the other phases3 References: 3: The TOGAF Standard, Version 9.2, Part III: ADM Guidelines and Techniques, Chapter 26: Business Scenarios : The TOGAF Standard, Version 9.2, Part II: Architecture Development Method (ADM), Chapter 18: Phase A: Architecture Vision

NEW QUESTION 11
Complete the sentence. The architecture domains that are considered by the TOGAF standard as subsets of an overall enterprise architecture are Business, Technology,

• A. Logical and Physical
• B. Information and Data
• C. Capability and Segment
• D. Application and Data

Answer: D

Explanation:
These domains provide a consistent way to describe and understand the architecture from different perspectives, such as business, information, and technology12.
Each domain has its own set of concepts, models, views, and artifacts that define the structure and behavior of the architecture within that domain12.
The other options are incorrect because:
•Logical and Physical are not architecture domains, but rather levels of abstraction that can be applied to any domain. Logical architecture describes the functionality and behavior of the system, while physical architecture describes the implementation and deployment of the system3.
•Information and Data are not distinct architecture domains, but rather aspects of the same domain. Information architecture describes the meaning and context of the data, while data architecture describes the structure and format of the data4.
•Capability and Segment are not architecture domains, but rather levels of granularity that can be applied to any domain. Capability architecture describes the current and desired states of a specific business capability, while segment architecture describes a subdivision of the enterprise that has a clear business focus5.
References: 1: The TOGAF Standard, Version 9.2 - Definitions 2: TOGAF® Standard — Introduction - Definitions 3: [Logical vs Physical Architecture] 4: [Information Architecture vs Data Architecture] 5: [The TOGAF Standard, Version 9.2 - Applying the ADM Across the Architecture Landscape]

NEW QUESTION 12
Which of the following best summarizes the purpose of Enterprise Architecture?

• A. Taking major improvement decisions.
• B. Guiding effective change.
• C. Controlling the bigger changes.
• D. Governing the Stakeholders.

Answer: B

Explanation:
EA applies architecture principles and practices to analyze, design, plan, and implement enterprise analysis that supports digital transformation, IT growth, and the modernization of IT2. EA also helps organizations improve the efficiency, timeliness, and reliability of business information, as well as the alignment, agility, and adaptability of the architecture to the changing needs and requirements3. Therefore, the best summary of the purpose of EA is to guide effective change.
References: 1: Enterprise architecture - Wikipedia 2: What is enterprise architecture? A framework for transformation 3: 3 The Purpose of Enterprise Architecture - The Open Group

NEW QUESTION 13
Exhibit:

Consider the illustration. What are the items labelled A, B, and C?

• A. A-Enterprise Repository, B-Governance Repository, C-Board Repository
• B. A-Architecture Repository, B-Governance Repository, C-Architecture Capability
• C. A-Architecture Repository, B-Governing Board, C-Enterprise Capability
• D. A-Enterprise Repository, B-Board repository, C-Enterprise Capability

Answer: C

Explanation:
✑ A-Architecture Repository: This is a part of the Architecture Metamodel that contains artifacts structured according to the metamodel. It includes the Architecture Landscape which is adopted by the enterprise and governed by certain standards and practices.
✑ B-Governing Board: The Governing Board ensures visibility and escalation, meaning it oversees and manages the capability of the architecture landscape. It plays a crucial role in governance.
✑ C-Enterprise Capability: This refers to how well an enterprise can execute its mission, meet business objectives or satisfy its stakeholders?? needs and expectations. It??s influenced by both internal factors (like resources, processes) and external ones (like market trends).
References: TOGAF Version 9.1, Chapter 34: 1

NEW QUESTION 14
What is presented as ??striking a balance between positive and negative outcomes resulting from the realization of either opportunities or threats?

• A. Agile development
• B. Architecture Security
• C. Transition Management
• D. Risk Management

Answer: D

Explanation:
Risk Management is the process of identifying, assessing, and responding to risks that may affect the achievement of the enterprise??s objectives. Risk Management involves balancing positive and negative outcomes resulting from the realization of either opportunities or threats. Reference: The TOGAF® Standard | The Open Group Website, Section 3.3.3 Risk Management.

NEW QUESTION 15
Consider the following statement.
According to the TOGAF standard, a governed approach of a particular deliverable will ensure adherence to the principles, standards, and requirements of the existing or developing architectures.
Which deliverable does this refer to?

• A. The Architecture Vision
• B. The Statement of Architecture Work
• C. An Architecture Contract
• D. The Architecture Definition Document

Answer: C

Explanation:
According to the TOGAF Standard, 10th Edition, an architecture contract is ??a formal agreement between a service provider and a service consumer that defines the mutual commitments and expectations for the delivery of an architecture?? 1. An architecture contract is a governed approach of aparticular deliverable that will ensure adherence to the principles, standards, and requirements of the existing or developing architectures, as it specifies the roles, responsibilities, deliverables, quality criteria, and acceptance criteria for the architecture work 1. The other options are not correct, as they are not governed approaches of a particular deliverable, but rather different types of deliverables within the architecture development process. An architecture vision is ??a high-level, aspirational view of the target architecture?? 1. A statement of architecture work is ??a document that defines the scope and approach that will be used to complete an architecture project?? 1. An architecture definition document is ??a document that describes the baseline and target architectures for one or more domains?? 1. References: 1: TOGAF Standard, 10th Edition, Part I: Introduction, Chapter 3: Definitions.

NEW QUESTION 16
Complete the sentence The TOGAF standard covers the development of four architecture
domains. Business. Data, Technology and .

• A. Segment
• B. Transition
• C. Capability
• D. Application

Answer: D

Explanation:
The TOGAF standard covers the development of four architecture domains: Business, Data, Technology and Application. These domains represent different aspects of an enterprise??s architecture and provide a consistent way of describing, analyzing, and designing them. Reference: The TOGAF® Standard | The Open Group Website, Section 2.2 Architecture Development Method (ADM).

NEW QUESTION 17
......