Answer: C 

Explanation: 

We don't need to restart the server to defragment the AD database. We do need to stop 

AD DS in order to defragment the database. 

Explanation: 

http://technet.microsoft.com/en-us/library/cc794920.aspx 

To perform offline defragmentation of the directory database 

1. Open a Command Prompt as an administrator: On the Start menu, right-click Command Prompt, and then click Run as administrator. If the User Account Control dialog box appears, provide credentials, if required, and then click Continue. 

2. At the command prompt, type the following command, and then press ENTER: net stop ntds 

3. Type Y to agree to stop additional services, and then press ENTER. 

4. At the command prompt, type ntdsutil, and then press ENTER. 

Answer: C 

Explanation: 

Old Answer: Run the Wbadmin utility at the command prompt. Answer: Select the System Image Recovery option. 

http://technet.microsoft.com/en-us/library/cc755163.aspx Recover the Operating System or Full Server Applies To: Windows Server 2008 R2 You can recover your server operating system or full server by using Windows Recovery Environment and a backup that you created earlier with Windows Server Backup. You can access the recovery and troubleshooting tools in Windows Recovery Environment through the System Recovery Options dialog box in the Install Windows Wizard. In Windows Server 2008 R2, to launch this wizard, use the Windows Setup disc or start/restart the computer, press F8, and then select Repair Your Computer from the list of startup options. 

To recover your operating system or full server using a backup created earlier and Windows Setup disc 

1. Insert the Windows Setup disc that has the same architecture of the system that you are trying to recover into the CD or DVD drive and start or restart the computer. If needed, press the required key to boot from the disc. The Install Windows Wizard should appear. 

2. In Install Windows, specify language settings, and then click Next. 

3. Click Repair your computer. 

4. Setup searches the hard disk drives for an existing Windows installation and then displays the results in System Recovery Options. If you are recovering the operating system onto separate hardware, the list should be empty (there should be no operating system on the computer). Click Next. 

5. On the System Recovery Options page, click System Image Recovery. This opens the Re-image your computer page. 

http://technet.microsoft.com/en-us/magazine/dd767786.aspx Use the Wbadmin Backup Command Line Utility in Windows Server 2008 Wbadmin is the command-line counterpart to Windows Server Backup. You use Wbadmin to manage all aspects of backup configuration that you would otherwise manage in Windows Server Backup. This means that you can typically use either tool to manage backup and recovery. After you’ve installed the Backup Command-Line Tools feature, you can use Wbadmin to manage backup and recovery. Wbadmin is located in the %SystemRoot%\System32\ directory. As this directory is in your command path by default, you do not need to add this directory to your command path. Further information: http://technet.microsoft.com/en-us/library/cc754015%28v=ws.10%29.aspx 

Wbadmin Enables you to back up and restore your operating system, volumes, files, folders, and applications from a command prompt. 

C:\Documents and Settings\usernwz1\Desktop\1.PNG 

Remarks The wbadmin command replaces the ntbackup command that was released with previous versions of Windows. You cannot recover backups that you created with ntbackup by using wbadmin. However, a version of ntbackup is available as a download for Windows Server 2008, Windows Vista, Windows Server 2008 R2, or Windows 7 users who want to recover backups that they created using ntbackup. This downloadable version of ntbackup enables you to perform recoveries only of legacy backups, and it cannot be used on computers running Windows Server 2008, Windows Vista, Windows Server 2008 R2, or Windows 7 to create new backups. http://technet.microsoft.com/en-us/library/dd979562%28v=ws.10%29.aspx Backup and Recovery Overview for Windows Server 2008 R2 Windows Server 2008 R2 contains features to help you create backups and, if needed, perform a recovery of your operating system, applications, and data. By using these features appropriately and implementing good operational practices, you can improve your organization's ability to recover from damaged or lost data, hardware failures, and disasters. For Windows Server 2008 R2, there are new features that expand what you can back up, where you can store backups, and how you can perform recoveries. 

This table summarizes the tools you can use to perform the following backup or recovery tasks for your computers running Windows Server 2008 R2: 

C:\Documents and Settings\usernwz1\Desktop\1.PNG 

What is Windows Recovery Environment? 

You can access the recovery and troubleshooting tools in Windows Recovery Environment through the System Recovery Options dialog box in the Install Windows Wizard. In Windows Server 2008 R2, to launch this wizard, use the Windows Setup disc or start/restart the computer, press F8, and then select Repair Your Computer from the list of startup options. Features in Windows Recovery Environment The tools in Windows Recovery Environment include: System Image Recovery. You can use this tool and a backup that you created earlier with Windows Server Backup to restore your operating system or full server. Windows Memory Diagnostic. You can use this tool (which is a memory diagnostic schedule) to check your computer's RAM. Doing this requires a restart. In addition, this tool requires a valid Windows Server 2008, Windows Vista, Windows Server 2008 R2, or Windows 7 installation to function. Command Prompt. This opens a command prompt window with Administrator privileges that provides full access to your file system and volumes. In addition, certain Wbadmin commands are only available from this command window. 

Answer: B 

Explanation: 

http://technet.microsoft.com/en-us/library/cc753217.aspx Set Aging and Scavenging Properties for the DNS Server The DNS Server service supports aging and scavenging features. These features are provided as a mechanism for performing cleanup and removal of stale resource records, which can accumulate in zone data over time. You can use this procedure to set the default aging and scavenging properties for the zones on a server. Further information: http://technet.microsoft.com/en-us/library/cc771677.aspx Understanding Aging and Scavenging 

Answer: C 

Explanation: 

http://support.microsoft.com/kb/243629 

HOW TO: Add UPN Suffixes to a Forest 

Adding a UPN Suffix to a Forest 

Open Active Directory Domains and Trusts. 

Right-click Active Directory Domains and Trusts in the Tree window pane, and then click Properties. 

On the UPN Suffixes tab, type the new UPN suffix that you would like to add to the forrest. Click Add, and then click OK. 

Now when you add users to the forest, you can select the new UPN suffix to complete the user's logon name. 

APPLIES TO 

Microsoft Windows 2000 Server 

Microsoft Windows 2000 Advanced Server 

Microsoft Windows 2000 Datacenter Server 

Answer: C 

Explanation: 

Creating a new site and assigning a subnet of 10.1.1.2 with subnet mask of 255.255.255.255, it means only ONE ip (the DC2 ip) will be included on the site1 subnet coverage. Therefore all the request will be processed from the DC1 in the default-first-site and dc2 will authenticate only itself. 

Answer: A 

Answer: A 

Explanation: 

http://skibbz.com/understanding-of-advance-properties-settings-in-window-server-2003-and-2008-dns-serverbind-secondaries/ Understanding Of Advance Properties Settings In Window Server 2003 And 2008 DNS Server (BIND Secondaries) BIND Secondaries controls the zone transfer between different vendor DNS server. It help verifies the type of format used zone transfer, whether it is fast or slow transfer (zone transfer). The full mean of BIND is Berkeley Internet Name domain (BIND). BIND is a based on UNIX operating system. Two window servers do not required BIND. BIND is only required when transfer dns zone between two different dns server vendors (UNIX and Microsoft Window). If you are using only Window server for dns and zone transfer you will have to disable this option in the window dns server. However if you want the server to perform a slow zone transfer and uncompressed data transfer then you will have to enable BIND in the dns server. To reiterate, BIND only provide slow dns zone transfer and data compression mechanism for DNS server. BIND is understood to have been introduced in window server to support UNIX. System admin will normally disable this option if they want the data in their dns zone transfer to between primary and secondary dns server to be transfer faster in order to improve dns queries efficiency within their network environment Bind is used in a DNS window server, when the needs to configured zone transfer between window server and UNIX server or operative system. Bind is enabled when a window server is configured as a primary dns server and a UNIX computer is configured as a secondary dns server for zone transfer. BIND Secondaries need to be configured to mitigate, the problem of interoperability between the two server operating system since they are from different vendors. Note that old version of the BIND was noted to be very slow and uses an uncompressed zone transfer format. However, BIND in window server 2008 and later has improved this problem. This is because it was noted that BIND in window server 2008 and later uses faster, compressed format during zone transfer between primary and secondary DNS server configured in for different server operating system (UNIX and Window server). 

Answer: B,D 

Explanation: 

http://technet.microsoft.com/en-us/library/cc781031%28v=ws.10%29.aspx Specifying Group Policy for Slow Link Detection Administrators can partially control which Group Policy extensions are processed over a slow link. By default, when processing over a slow link, not all components of Group Policy are processed. Table 2.6 shows the default settings for processing Group Policy over slow links. 

C:\Documents and Settings\usernwz1\Desktop\1.PNG 

Administrators can use a Group Policy setting to define a slow link for the purposes of applying and updating Group Policy. The default value defines a rate slower than 500 Kbps as a slow link. http://technet.microsoft.com/en-us/library/cc783635%28v=ws.10%29.aspx Assigning and Publishing Software 

Assigning software to computers After you assign a software package to computers in a site, domain, or OU, the software is installed the next time the computer restarts or the user logs on. Further information: http://technet.microsoft.com/en-us/library/cc978717.aspx Group Policy slow link detection 

Answer: D 

Explanation: 

http://technet.microsoft.com/en-us/library/dd759243.aspx 

Installation requirements 

Before installing the certificate enrollment Web services, ensure that your environment 

meets these requirements: 

A host computer as a domain member running Windows Server 2008 R2. 

An Active Directory forest with a Windows Server 2008 R2 schema. 

An enterprise certification authority (CA) running Windows Server 2008 R2, Windows 

Server 2008, or 

Windows Server 2003. 

Answer: D 

Explanation: 

We cannot use Dsmod here, because it supports only a subset of commonly used object 

class attributes. 

Csvde can only import and export data. 

Dsrm is used to delete objects from the directory. 

Explanation: 

http://technet.microsoft.com/en-us/library/cc731033.aspx 

Ldifde 

Creates, modifies, and deletes directory objects.